Pool Community

When my pool filter is on the heater is on and the heater is set to off on my remote control panel. Can't run my pool filter anymore. Any ideas?
  Plaese log in to rate this article.

Hi Dirk There must be a disconnect between the heater and your remote control panel. Most controllers systems with an in-house panel, also have an outside control box, and also controls on the heater itself. On the control panel outside, your system may be set in "Service" mode, for outside control, which overrides, the inside panel. Or you may have an issue with the wires that run into the heater, connecting it to the outside control box. On the heater itself, you should have an on/off switch or button, and the ability to reduce the thermostat setting, both which should keep the heater from turning on. Hope that helps! Let me know if you have other questions. Rob



Click on a STAR and give it YOUR rating?
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5